Custom Metalworks

HOME

LINKS

CONTACT US

Featuring AN Wireless Self-Supporting Towers

Tower Heights from 20' to 120' --- Wind Loading 70 to 120 MPH

Custom Metalworks is now the West Coast Manufacturer and Distributor of AN Wireless Self-Supporting Tower Systems for Wireless Communications, Wireless Internet, Wireless Networking, Microwave, Paging, Broadcast, Two-Way Radio and Amateur Radio.

We stock the full line of AN Wireless products ready to ship on short notice.

For more detailed information about all AN Wireless products, including wind loading specifications, foundation details and photos, please visit the AN Wireless home page.

	Towers designed to ANSI/TIA/EIA-222-F
	Fully Hot-Dip galvanized to ASTM-A123
	Professional Engineer (PE) seals included
	Constructed from 50 KSI steel throughout
	Base sub-structure included with each tower
	All galvanized connection hardware included
	Climbing step bolts available every 18 inches
	Soil foundation design drawings
	Full engineering specifications available
	Different widths and heights to choose from
	Allowable wind exposures from 70 - 120 MPH
	Available tower heights from 20' - 120'
	Safety lifeline, and climbing belts available
	Commercial bulk discounts are available
	Very competitive price structure

Custom Metalworks products available exclusively through Array Solutions.

Contact Array Solutions for current pricing and availability.

Standard-duty Antenna Side Mount

Custom Metalworks manufactures the ultimate antenna side mounts. Both models are compatible with Rohn 25G, 45G and 55G towers and provide the best way to side mount antennas and rotators on your tower.

Welded and bolt-together construction
Rotor plate drilled for Ham-M, T²X and M² Orion 2800 rotors
Top plate drilled for Rohn TB-3 thrust bearing
Hot-Dipped galvanized after fabrication
UPS shippable

Photo shows two (2) of the Heavy-duty side mounts on a single mast

Heavy-duty Antenna Side Mount

Our Heavy-duty side mount is designed for larger, long boom yagis and for areas where high winds are an issue. The all-welded construction of this side mount makes it extremely rigid and prevents the common twisting problems inherent in bolt-together side mounts made from angle iron.

Welded construction
Uses 2" square tubing for arms
Integrated antenna boom truss support (2" x .125" wall steel tubing)
Hot-dip galvanized after fabrication

Heavy-duty Rotor and Thrust Bearing Plates

3/16" thick
Separate designs for Rohn 45G and 55G tower
Our 55G plate fits Rohn 55 tower properly, unlike the Rohn model AS455.
Drilled for Ham-M. T²X and M² Orion 2800 rotors and Rohn TB3 and TB4 thrust bearings
Hot-dip galvanized after fabrication
UPS shippable


	PRODUCTS