|
|
Rotating Tower Systems |
|
|
"THE ORIGINAL AND STILL THE BEST" |
|
|
Rotating Tower Systems |
|
|
"THE ORIGINAL AND STILL THE BEST" |
|
|
|
||||
|
CLICK Images For A Closer View |
||||||
|
|
|
Using our components you can
build a rotating tower with greater capability than 3-4 static towers. A
rotating tower allows common rotation of HF stacked arrays, VHF and UHF arrays,
and antennas mounted at optimum heights. Component design also allows
tower shunt loading and end support for wire antennas. |
|
|
Quality Assurance |
||
|
Hardware from Rotating Tower Systems is professionally designed and built. The designer of this hardware holds BSME and MSME degrees, is a Registered Professional Engineer, holds numerous patents, and has twenty five years of mechanical design engineering experience. In addition, all fabrication is done by qualified skilled craftsmen. Welding is done by an ASME Certified Welder and galvanizing is done per ASTM specifications. Our components have been designed and built to be at least twice as strong as the tower type with which it is used. The limits of an installation are dictated by the tower type with no restriction imposed on system design by our components. Long service life is assured by having all steel parts hot dip galvanized and using only readily available commercial bearings. The Bearings used were selected to provide very large safety factors by having load ratings very much in excess of the forces seen in operation. This further ensures long and trouble free operation. |
||
|
|
|
|
|
Copyright 2011 - Custom Metalworks |
