KGON PROJECT

 

HOME

PRODUCTS GALLERY LINKS CONTACT US

KGON TOWER
Portland, Oregon

Installation of 2GHz Microwave Antennas
at the 470' Level.  700' Run of Eliptical Waveguide to the Antennas.






CLICK
on images below for larger versions

Tower base 700' spool of eliptical waveguide
9' dia. spool Close-up of the waveguide
Bottom of the 6' diameter
 center tube that runs up to
the top of the tower.
Robert Rogers
Preparing to climb the tower.
Looking up the 500' tube.
Note the climbing ladder.
Tunnel containing feedlines and
control cables.  The new
waveguide is laying on the floor.
Hauling the antennas up. Close-up of the antenna.
Installing the antennas. The installed 2GHz antenna.
Working at the 500' level. Another view of the antenna
More antenna shots... More antenna shots...
Great view of Portland!
View of the top of the tower
from the ground.
Another view of the top of the
tower from the ground.

Home  |  Products  |  Gallery  |  Links  |  Contact Custom Metalworks

 

Copyright 2008 - Custom Metalworks
Last modified on June 18, 2008 14:44:04 PM